Specialty Surface Cellware and Inserts
Corning™ Transwell™ with Polycarbonate Membrane Insert
Transwell™ with 0.4 μm thick translucent polycarbonate membrane is treated for optimal cell attachment.
MilliporeSigma™ Millicell-24 Cell Culture Insert Plate
Millicell-24 Cell Culture Insert Plate is a single-well feeder tray made of sterile polycarbonate.
STEMCELL Technologies Organoid Embedding Sheet (6-Pack), Size: 6 Units
The Organoid Embedding Sheet is designed to facilitate embedding 3-dimensional (3D) aggregates (e.g. embryoid bodies, spheroids, or organoids) into a matrix. The wells on the sheet are designed to fit aggregates up to 5 mm in diameter. The sheet may be grasped at the top, along the label, for easy handling. The Organoid Embedding Sheet can also be a substitute for Parafilm and used to mix small volumes in various protocols. Each sheet contains 18 wells, and the sheet is compatible with STEMCELL media products such as STEMdiff™ Cerebral Organoid Kit (Catalog #08570).
CELLTREAT Scientific Products Permeable Cell Culture Inserts, Packed in 24 Well Plate, Hanging, PC, 8.0m, Sterile, 24/CS
CELLTREAT Scientific Products Permeable Cell Culture Inserts. Permeable Cell Culture Inserts mimic in vivo conditions. Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well. Ideal for drug transfer assays, transport studies, migration assays, and cell-cell interaction studies. Inserts center in wells, preventing membrane from touch-ing sides and wicking between insert and side wall. 0.4um pore size is ideal for co-culture and drug transport studies. 3.0 and 8.0um pore size is ideal for angiogenesis and chemotaxis experiments. Non -Treated Plates sold separately; carrier plate is Tissue Culture Treated. Plate manufactured from high clarity virgin polysytrene with polycarbonate membrane insert. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile with 12 Inserts/plate, 2 Plates/case, 24 Inserts/case.
Altenloh Brinck & Co US INC. DBA: SABEU 6 well insert 8.0 um PET PK48 (cellQART)
These cellQART Cell Culture Inserts come with PET membranes in clear optics in 6-Well format. The Inserts are tissue culture treated, sterile and are compatible with most standard Cell Culture Plates. They are ideal for in-situ phase contrast microscopy.
CELLTREAT Scientific Products Permeable Cell Culture Inserts, Packed in 12 Well Plate, Hanging, PC, 0.4µm, Sterile
Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall. Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well. Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions. Insert features openings to allow access to lower compartment without removal from plate. 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts. PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy. 0.4μm pore size is ideal for co-culture and drug transport studies. 0.4μm PET inserts feature clear membranes for improved cell viewing. 3.0μm and 8.0μm pore size are ideal for angiogenesis and chemotaxis experiments.
Molecular Devices VENTED QTRAY WITH COVER & 48
Vented Qtray with cover & 48 Well Divider, polystyrene, 242 x 240 x 20 mm; 20 per case
CELLTREAT Scientific Products Permeable Cell Culture Inserts, Packed in 12 Well Plate, Hanging, PET, 0.4µm, Sterile
Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall. Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well. Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions. Insert features openings to allow access to lower compartment without removal from plate. 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts. PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy. 0.4μm pore size is ideal for co-culture and drug transport studies. 0.4μm PET inserts feature clear membranes for improved cell viewing. 3.0μm and 8.0μm pore size are ideal for angiogenesis and chemotaxis experiments.
Ibidi USA Culture-Insert 2 Well 24, #1.5 polymer coverslip
Complete solution for wound healing experiments, requiring only a few steps from sample preparation to image analysis.Reproducible experiments owing to: a defined 500 µm cell free gap, no leakage during cultivation, and no material being left behind after the insert’s removal. For screening applications. High parallelization. Based on µ-Plate 24 Well Black ID 14 mm – i.e., suitable for fluorescence and high resolution microscopy.
Sterlitech Corporation cellQART 24-Well Cell Culture Insert PET, 8.0um, Translucent, 48/pk
cellQART 24-Well Cell Culture Insert PET, 8.0um, Translucent, 48/pk
Ibidi USA Culture-Insert 4 Well in µ-Dish 35mm, High, ibiTreat - Tissue Culture Treated Polymer Coverslip
The ibidi Culture-Insert family is developed for wound healing, co-cultivation, and migration assays of adherent cells. A proprietary biocompatible adhesive is applied to the underside of the Culture-Insert which allows it to adhere to any flat, clean, and dry surface. The Culture-Insert 4 Well consists of four wells, representing the four quarters of the round Culture-Insert. The wells are separated by a wall of 500 µm. When the wells are filled with adherent cells, a cell–free gap of 500 µm is created between the adjacent wells after removing the Culture-Insert 4 Well. Additionally, a center gap of 1000 µm is created, allowing to observe the migration of all cell types at once. Live-cell imaging can be used to analyze the gap closures. The Culture-Insert 4 Well comes ready-to-use in our µ-Dish 35 mm, High, ibiTreat dishes. Sterile, 30 pcs./box.
Electron Microscopy Sciences MultiDish 6 Well Round, Collagen I Coated, 35 mm wells, 2.0-5.0 mL Working volume
MultiDish Surface is useful in all areas of cell culture including scale-up and cloning. Raised well rims to lower risk of cross contamination. Excellent optical quality. Nunclon™Δ certified.
Coating: Collagen I, rat tail
Well size: 35 mm
Working volume: 2.0-5.0 mL
Area: 9.6 cm2
Plate size: 88 x 132 mm
Sigma Organic Chemistry Indium tin oxide coated PET | 5EA | MFCD00171662
Indium tin oxide coated PET, 5EA
About This Item:
MDL Number: MFCD00171662
UNSPSC Code: 12352103
Storage: room temp
Electron Microscopy Sciences NUNC™ Polycarbonate Membrane for Multidish 12, 0.4 µm pores
Treated and tested for cell attachment. Easy cultivation of most cell types without matrix coating. Used in a varity of applications, including transport studies, toxicity tests, chemotaxis studies and electron microscopy. Non-toxic. Packed in sterile Nunclon™Δ treated multidishes. Packed in resealable bags. Non-pyrogenic. Tabs for better grip/handling.
Pore size: 0.4 µm
Porosity: <6.8 percent
Culture Area: 1.13 cm2
Working volume: 1.1 ml
Electron Microscopy Sciences NUNC™ Polycarbonate Membrane for Multidish 12, 8 µm pores
Treated and tested for cell attachment. Easy cultivation of most cell types without matrix coating. Used in a varity of applications, including transport studies, toxicity tests, chemotaxis studies and electron microscopy. Non-toxic. Packed in sterile Nunclon™Δ treated multidishes. Packed in resealable bags. Non-pyrogenic. Tabs for better grip/handling.
Pore size: 8 µm
Porosity: <2.7 percent
Culture Area: 1.13 cm2
Working volume: 1.1 ml